Getting Started - Lumie Bodyclock STARTER 30 Guide D'utilisation

 English

Getting started

Here's how to set up your Bodyclock Starter for the first time.
The bulb is supplied packed in a separate box and needs to be fitted into the
Bodyclock Starter before use.
to remove the lamp cover
The lamp cover is attached to the base of the Bodyclock Starter by two
internal clips, one at either end of the cover:
Clip
•
Squeeze gently near the middle of the lamp cover to release the clips.
•
Remove the lamp cover.
to fit the bulb
•
Screw the bulb into the holder.
•
Replace the lamp cover by pressing it down until the clips at each end pop
into place.
to position Bodyclock Starter
•
Decide where to put your Bodyclock Starter.
The ideal place is on a bedside table near the head of your bed, near a mains
socket.
Squeeze here
Squeeze here
Getting started
Clip