First Use; Setting Up The Appliance; Preparing The Appliance - SilverCrest SMW 800 C2 Mode D'emploi

First use

GB
ATTENTION! MATERIAL DAMAGE!
IE
► Never operate the appliance when it is empty.
There is a danger of overheating, especially
in the "microwave" and "combination cooking
process" modes!

Setting up the appliance

WARNING! RISK OF FIRE!
► This microwave oven is not suitable for instal-
lation in a kitchen cabinet. Suffi cient ventila-
tion for the appliance cannot be assured in
enclosed cabinets. The appliance could be
damaged and there is an additional risk of
a fi re!
■ Select an level surface off ering suffi cient space
for the adequate ventilation of the appliance:
■ Ensure that you maintain a minimum clearance
of 10 cm from neighbouring walls/surfaces.
Make sure that the door of the microwave oven
can be opened easily.
■ Keep a gap of at least 20 cm free above the
microwave.
■ Ensure that the electrical plug is accessible with-
out problem, so that it can be easily reached
and removed in case of danger.
■ Do not remove the feet underneath the micro-
wave oven.
Do not block the ventilation openings 5. If you
■
do, it could cause damage to the appliance.
■ Install the appliance as far away as possible
from radios and televisions. The operation of
the microwave oven can cause malfunctions
of radio and television reception.
10
ATTENTION! MATERIAL DAMAGE!
► Do not install the microwave above a cooker
or any other appliance generating heat.
Installation in such a location could cause
damage to the appliance and thus invalida-
tion of the warranty.

Preparing the appliance

1) Remove all packaging materials and any
stickers from the appliance.
NOTE
Do not remove the light grey mica
cover plate, which is mounted in
the cooking chamber to protect the
magnetron.
2) Place the rotator assembly 3 on the drive axle
in the cooking chamber so that this is fi tted
securely onto the drive axle.
3) Place the glass plate 2 centrally on the rotator
assembly 3.
4) Insert the plug into a mains power socket. Use
a 230–240 V ~ , 50 Hz, mains power socket
with a 16 amp fuse. It is recommended that
the microwave oven is powered from its own
power circuit. If you are unsure about how
to connect the microwave oven, consult a
specialist.
Before using the microwave oven, the appliance
must be heated up without food to remove any
remaining production residues.
Place a microwaveable and heat-proof bowl fi lled
with water in the microwave.
Switch the appliance on in grill mode.
1) Press the Grill button q
This selects Grill mode. The
in the display 1.
2) Adjust the control dial 9 to a cooking time
of 3 minutes.
3) Press Start/Quick start 9
process.
once.
icon appears
to start the grilling
SMW 800 C2