Earthing Information/ Installation; Radio Interference With Other Appliances - SilverCrest SMW 800 C2 Mode D'emploi

ATTENTION! PROPERTY DAMAGE!
GB
IE
Never operate the appliance in the operating mode "microwave" or using
►
combination cooking processes if there is no food inside.
Never operate the microwave oven when it is empty.
►
Never insert any foreign objects into the ventilation openings or the door
►
safety locks.
Do not use metallic utensils which could refl ect microwaves and lead to
►
sparking. Do not place cans in the microwave oven.
The microwave oven may not be set up in areas with high humidity or
►
where moisture could collect.
Do not lean on the microwave oven door.
►
Insuffi cient cleanliness of the appliance could lead to the destruction of
►
the upper surfaces, which themselves aff ect its useful lifespan and could
possibly lead to dangerous situations.
Do not move the microwave oven when it is in use.
►
Earthing information/
installation
■ This appliance must be earthed. This appliance
is to be connected only to a correctly earthed
power socket. An individual circuit solely for the
connection of the microwave is recommended.
DANGER – ELECTRIC SHOCK!
► Improper use of the earthing connector could
increase the risk of an electric shock.
NOTE
► If you have any questions about earthing or
the instructions on the use of this electrical
appliance, please consult an electrician or
a maintenance technician.
■ Neither the manufacturer nor the dealer can
accept liability for damage to the microwave
oven or injury to persons resulting from failure
to comply with the instructions for electrical
connection.
8
Radio interference with other
appliances
The operation of the microwave may cause interfer-
ence on your radio, television or similar appliances.
If such interference occurs, it can be reduced or
corrected by the following remedial measures:
■ Clean the door and the sealing surface of the
microwave.
■ Reorient the receiving antenna of the radio or
television.
■ Position the microwave in a diff erent location to
the receiver.
■ Move the microwave away from the receiver.
■ Plug the microwave into another wall socket.
The microwave and the receiver should be
connected to diff erent circuits.
SMW 800 C2