Technical Data - Soehnle SOLAR FIT Mode D'emploi

Masquer les pouces Voir aussi pour SOLAR FIT:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Ihre gesetzlichen Rechte, insbesondere
Gewährleistungsrechte, gelten für Sie weiterhin und
werden durch diese Garantie nicht beschränkt.
I. EG-Konformität
Dieses Gerät entspricht der geltenden EG-Richtlinie
2004/108/EC.
K. Entsorgung von elektrischen und
elektronischen Geräten
EG-Richtlinie 2002/96/EC
Dieses Produkt ist nicht als normaler Haus haltsabfall zu
behandeln, sondern an einer Annahmestelle für das
Recycling von elektrischen und elektronischen Geräten
abzugeben. Weitere Informationen erhalten Sie über
Ihre Gemeinde, die kommunalen Entsorgungsbetriebe
oder das Geschäft, in dem Sie das Produkt gekauft
haben.
EN
A. Operating elements
1. Confirm (
)
2. Minus ( )
3. Plus ( )
B. Preparation
1. For all measurements place scale level on a hard
surface (not carpet). Ensure sufficient illumination.
Do not cover solar cells.
2. A country-specific option to switch from kg/cm to lb/
in or st/in is possible by pushing the key on the bot-
tom of the scale to switch units.
Attention! Slipping hazard
in case of wet surface.
C. Data input
Note: Place the body analysis scale on a level surface.
Then begin with data entry. Otherwise, it might be pos-
sible that the weight of the scale would erroneously be
added to the initial weighting process.
The same might occur if the scale is held in the hand
prior to the weighting process.
1. Start data entry (push
2. Select memory slot (P1 ... P8) (
plus) and confirm (
3. Enter body height and age
and confirm (
).
- key for 1 second)
= minus,
).
= minus,
= plus)
4. Select gender using
and confirm (
5. The number of the memory slot is being displayed.
Push
key.
0.0 appears on the screen.
6. Then immediately step on the scale with bare feet
for the first body analysis. If you step on the scale
with socks or shoes, then only the body weight will
be displayed.
The initial measurement is indispensable and serves to
store the data for later automatic recognition of persons.
If no person steps on the scale, data entry must be
repeated.
This scale is equipped with a Time-Out mode. It will
automatically switch off after approx. 40 seconds if no
keys are pressed.
D. Body analysis
1. Step on the scale with bare feet; stand still for
approx. 5 sec.
2. Automatic recognition of persons. Select personal
memory slot (
recognized.
3. Display weight, body fat content, body water content,
and personal memory slot.
Note: Body fat and water are calculated based on the
determined weight and the personal data.
4. Step off the scale.
E. Messages
1. Overload: Over 150 kg.
F. Cleaning and Care
Clean only using slightly damp cloth. Do not use sol-
vents or abrasives. Never submerge scale in water.
G. Technical data
Load capacity x graduation = max. 150 kg x 100 g
Graduation of body fat content: 0.1%
Graduation of body water content: 0.1%
Body height: 100-250 cm
Age: 10-99 years
8 individual memory slots
=
(
= male,
).
) if person cannot be automatically
= female)
3

Publicité

Table des Matières
loading

Table des Matières