Performing Settings - TESTO 416 Mode D'emploi

5.4 Performing settings

1
To o o pen c c onfiguration m m ode:
The instrument is switched on and is in measurement
view. Hold, Max or Min are not activated.
Press and hold
changes.
- The instrument is now in configuration mode.
You can change to the next function with
You can leave configuration mode at any time. To do
so, press and hold
instrument has changed to measurement view. Any
changes that have already been made in configuration
mode will be saved.
2
To s s et t t he a a rea:
Configuration mode is opened, m
Set the cross-sectional area with
confirm with
3
To s s et A A uto O O ff:
Configuration mode is opened, AutoOff is flashing.
Select the desired option with
with :
· on: The measuring instrument switches off
automatically if no button is pressed for 10min (Hold
or Auto Hold is lit).
· oFF: The measuring instrument does not switch
itself off automatically.
4
To s s et t t he u u nit o o f m m easurement:
Configuration mode is opened, UNIT is lit.
Select the desired unit of measurement with
and confirm with
(for approx. 2s) until the display
(for approx. 2s) until the
.
.
5. Operation 25
.
2 2
or in is flashing.
/ and
/ and confirm
/