Switching The Display Light On/Off; Performing Settings - TESTO 616 Mode D'emploi

24 5. Operation
5.2 Switching the display
Switching t t he d d isplay l l ight o o n/off:
The instrument is switched on.
Press

5.3 Performing settings

1
To o o pen c c onfiguration m m ode:
The instrument is switched on and is in measurement
view. Hold, Max or Min are not activated.
Press and hold
changes.
- The instrument is now in configuration mode.
You can change to the next function with
You can leave configuration mode at any time. To do
so, press and hold
instrument has changed to measurement view. Any
changes that have already been made in configuration
mode will be saved.
2
To s s et A A uto O O ff:
Configuration mode is opened, AutoOff is flashing.
Select the desired option with
with
· on: The measuring instrument switches off
automatically if no key is pressed for 10 min.
Exception: A recorded reading is shown on the
display (Hold or Auto Hold is lit).
· oFF: The measuring instrument does not switch
itself off automatically.
light on/off
.
:
(for approx. 2 s) until the display
(for approx. 2 s) until the
.
/ and confirm