Zanussi ZDI22003XA Notice D'utilisation page 6

PROGRAMMES
Programme
2)
3)
4)
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
2) With this programme you have the most efficient use of water and energy consumption for crockery and
cutlery with normal soil. (Also, it is a standard programme for test institutes).
3) With this programme you can wash a load with fresh soil. It gives good washing results in a short period
of time.
4) Use this programme to quickly rinse the dishes and to prevent the food remains from drying out on the
dishes and to reduce bad odour coming out from the appliance. Do not use detergent with this pro-
gramme.
INFORMATION FOR TEST INSTITUTES
For all the necessary information for test
performance, send an email to:
info.test@dishwasher-production.com
SETTINGS
PROGRAMME SELECTION MODE
Programme selection mode allows selecting and
starting a washing programme with applicable
options and entering user mode to change the
appliance settings.
To enter the programme selection mode:
6
Degree of soil
Programme phases
Type of load
Normal soil •
Crockery and •
cutlery •
•
Heavy soil •
Crockery, cut- •
lery, pots and •
pans •
Normal soil •
Crockery and •
cutlery •
•
Fresh soil •
Crockery and
cutlery •
All •
Duration
(min)
Pre-wash 227
Wash 50 °C
Rinses
Dry
Pre-wash 155 -
Wash 70 °C 170
Rinses
Dry
Pre-wash 130 -
Wash 65 °C 140
Rinses
Dry
Wash 60 °C 30
or 65 °C
Rinses
Pre-wash 14
Write down the product number (PNC) that is on
the rating plate.
Rotate the programme knob to a position in which
the programme marker points at one of available
programmes.
If the appliance is on and the programme marker
points at one of available programmes, but the
control panel does not indicate the appliance is in
Consumption values
1)
Energy
(kWh)
1.039
1.5 - 1.7
1.4 - 1.6
0.8
0.1
Water
(l)
11
14-15
15-17
10
5