SOLIS EASYVAC Professional Mode D'emploi page 100

C o n t r ol P A nE l
s
The control panel with function buttons
For easy supervision, the control light will illuminate next to or in the buttons,
depending on which function has been set by pressing the button.
A. Function light Ready
The Ready light will illuminate red when the appliance is turned on, locked with
the cover handle and operational. Should the light flash, please wait for it to
illuminate constantly.
B. Vacuum & Seal / Cancel button
Automatic vacuuming and sealing
The button with the blue control light has two functions:
1. Pressing it while the appliance is in standby mode will start the vacuuming
process and automatically seal the bag after completion (Vacuum & Seal
function).
2. Pressing the button during operation will immediately stop the vacuuming
resp. sealing process (Cancel function).
C. Pulse Vacuum button
Manual vacuuming without automatic sealing
Pressing this button in standby mode will evacuate the bag, the red control light
will illuminate. Releasing the button will stop the vacuuming process. This allows
you to control the vacuuming process, f.e. with pressure sensitive foods. As soon
as enough air has been extracted, press the Manual Seal button to seal the bag.
100
H
G F E
D A
C B