SOLIS EASYVAC PRO Mode D'emploi page 78

Important:
– Make sure that the container lid is firmly pressed around the container. Press
the air extraction hose as deep as possible into the opening on the lid, so that
no air can enter the container.
– To check if there is enough vacuum pressure in the container, try to move the
lid a little. If it cannot be moved then the vacuum pressure is perfect.
i V. P O WER-CA blE St O RAG E
If the appliance is not in use, the power cable should be rolled up and placed in
the cable compartment on the underside of the appliance. Never wrap the cord
around the appliance!
78