Wireless Interlink - Sprue Safety Products WTSL-F-1EU Mode D'emploi Et Guide D'installation

WIRELESS INTERLINK

The Alarm Control Unit is designed to be used
as a remote interface on a network of up to 49
products within the Wi-Safe 2 range. The Alarm
Control Unit can be used to test, silence or locate
any alarms on the Wi-Safe 2 network. It is not
designed to communicate with wireless alarms
from other ranges or manufacturers. The control
unit needs to be 'learned-in' or interlinked, in
order to communicate within the network.
Wi-Safe Secure
Alarm Control Unit
Wi-Safe 2 enables wireless communication with
any other product with Wi-Safe 2 technology
inside. When one alarm detects smoke / heat /
carbon monoxide, the wireless module inside
sends a signal to all the connected alarms,
ensuring almost instantaneous reaction across
the network.
Wireless Interlink
Wi-Safe Secure
enabled device
7