Troubleshooting - Sprue Safety Products WTSL-F-1EU Mode D'emploi Et Guide D'installation

Issue
No lights come on when I press
any of the buttons on the Alarm
Control Unit
When pressing the test button
nothing is happening
Unable to remove the control unit
from its bracket
If you have any questions about the operation of your Alarm Control Unit, please contact Technical Support via email:
technicalsupport@fireangel.co.uk or by calling: 0800 171 2009.

TROUBLESHOOTING

Indication
This may indicate that the control unit has not been successfully activated, see section
'Activating the Alarm Control Unit'.
This indicates that the control unit has not been successfully activated, see section
'Activating the Alarm Control Unit'.
You need to disengage the locking pins. Refer to the 'Making the Alarm Control Unit Tamper
proof' section.
19