Features; Positioning; Installation - Sprue Safety Products WTSL-F-1EU Mode D'emploi Et Guide D'installation

FEATURES

• Wi-Safe 2 technology, enabling wireless
interlinking between other Wi-Safe 2
products.
• Test / Silence button, allowing you to regularly
test all wirelessly interlinked alarms on a
network. Pressing the silence button will reduce
the sensitivity of alarms for up to 10 minutes,
unless carbon monoxide has been detected, in
which case you can use the 'Locate' function
below to find the source alarm.
• Locate button, allowing you to silence all
alarms but the initiating alarm, during an
alarm condition. During a fault condition, this
feature will allow you to locate the alarm in
fault, in a similar way.
• 5 year warranty.

POSITIONING

This Alarm Control Unit is suitable for use in
domestic premises only. It should be installed
at an accessible point on the wall, in a location
where it will not be accidentally operated or
knocked. The Alarm Control Unit should be
installed at a height of approximately 1.4 meters
from the floor to be fully accessible.

INSTALLATION

ALWAYS:
• Ensure this Alarm Control Unit is installed by
a competent person who feels able to install
it according to the instructions.
• Read all installation instructions prior to
installing this product.
5