Textile Parts - shark NANO Manuel D'utilisation

Masquer les pouces Voir aussi pour NANO:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

CLEANING THE INTERIOR
The interior textile parts are washable; it is
important to strictly follow the instructions
below to avoid damaging them:
The cheek pads and head section must be
hand washed in warm, soapy water (about
30°). Do not use aggressive detergents but
either a product for delicate materials in low
dilution or household soap.
It is essential to dry textile and foam parts
completely before reinstalling them in the
helmet. They must be air dried at room
temperature. Never use a clothes dryer or
other heat source. Never iron textile parts.
For parts with a leather appearance or
textiles attached to safety elements, use a
slightly damp sponge or cloth and household
soap and rinse with clean water. Do not
allow too much water to come into contact
with polystyrene parts.
You must insure that all interior parts are
perfectly dry before using the helmet.
WARNING! Damaged interior padding
will compromise the fit of your helmet on
your head and could allow the helmet to come
off your head in an accident, resulting in a head
injury or death.

TEXTILE PARTS

THE TEXTILE PARTS
The textile and foam parts providing
comfort to the Shark Nano make it easy
for you to appreciate the performance of
your helmet to the full.
The parts in contact with the skin are
made in a fabric that is guaranteed to feel
pleasant, to absorb perspiration well and
to resist wear satisfactorily.
We treat surfaces to limit the risk of mould
and bacteria.
WARNING! Although
selected for their quality of resistance
and satisfactory wear, all the comfort
padding is subject to normal wear and
tear. The rate of wear and tear will depend
on use, care and maintenance, the length
of use and the degree of acidity of your
perspiration. Wear and tear of the comfort
padding will eventually change the fit of
your helmet on your head. If that occurs,
you must immediately replace the helmet or
padding. See your retailer for advice.
WARNING! Each time you put on your
helmet, check the fit as discussed in
"Choose your size".
13
they
are

Publicité

Table des Matières
loading

Table des Matières