shark NANO Manuel D'utilisation page 12

SUN SHIELD
12
A
B
THE SUN SHIELD REMOVAL
- Move the sun shield to the lower position
- Pull the sun shield delicately downward
(Fig. A).
- Pull the sun shield forward, one side at
a time, to unclip it from the mounting points
in the helmet (Fig. B).
C
D
THE SUN SHIELD REPLACEMENT
Carry out the above operation in reverse
order:
- Move the handling button to the low
position.
- Push, at one side at a time, the sun shield
forward to clip it onto the mounting points
in the helmet (Fig. C).
- And then clip the sun shield back on by
lifting it slightly (Fig. D).
WARNING! If you are not sure that
you properly replaced the sun shield,
do not use the helmet. The sun shield
could suddenly and without warning
become detached from the helmet while
riding, causing you to lose control of
your motorcycle, resulting in an accident,
personal injury, or death.
retailer for any assistance or advice.
Contact your