Viscount UNICO CL 7 Guide De L'utilisateur page 54

Viscount
UNICO
o FROM and TO: they select the limits of the area, set in outputs, within which the wind-chest is to be
located. The value is set as [output number-position between two outputs], bearing in mind that there are
four positions between one output and the next (2-4-6-8 on the display). A value of 20 means that the
end of the range (FROM or TO) is on output [2]; a value of 32 means that the FROM or TO point is
between output [3] and [4], close to [3] since it is in the first fifth of the area between output [3] and
output [4]. The screen shown above refers to a peaked wind-chest placed between output [1] and a
position between outputs [3] and [4].
o [position indicator]: it consists of small rectangles located above the drawing of the wind-chest and
indicates that the zone is displaying the part below the total number of outputs.
o [wind-chest on outputs]: in the bottom of the screen, it provides a graphic illustration of the wind-
chest with the references to the outputs being used, to give an immediate picture of its position and the
outputs which will carry the notes, in accordance with the wind-chest configuration.
To view the setup of another stop, simply activate the draw-stop / tab or press [EXIT] to quit the function.
In both cases the set-up just created is saved automatically.
7
/ 8 /
-
52
User Guide