Viscount UNICO CL 7 Guide De L'utilisateur page 41

User Guide
1. PEDAL Section.
Contains the pedal's stops and couplers for linking the manuals to the pedal board.
2. MAN.II Section.
Manual II stops, couplers (in the CL / CLV 8) and tremulant.
3. MAN.III Section.
Manual III stops and tremulant.
4. MAN.I Section.
Stops, manual couplers and tremulant for Manual I.
On each section of the CL / CLV 8 it is possible to play one or two orchestra voices. To do so the
desired sound has to be enabled through the "Alternative voice" function (see par. 8.3). The list of the
stops that can play orchestra voices changes according to the "tonal layout" implemented in the organ.
A web page were you can get info about your specific model is at your disposal at www.physisorgans.com/
download.asp.
5. Lighting button.
On-off button for the music stand and manuals lights.
6. Instrument on/off switch.
7. AMPLIFICATION Section.
Organ amplification controls.
- [CONSOLE ON] switches on the instrument's internal amplification system.
- [EXT. SPEAKER ON] enables the PROG. OUT external outputs in the rear panel (point 23).
8. CANCEL Section.
Cancel buttons which allow disabling of all the Reed voices ([REEDS] tab) and the Plenum voices
([MIXTURE] tab).
9. Control and programming section.
Contains the buttons and display for viewing and programming all the instrument's setup and sequencer
functions.
10. ORCHESTRA Section.
This section contains the organ's Orchestra stops.
11. MIDI Section
These controls, provided for each manual and the pedal board, allow transmission of the note MIDI
codes on the MIDI [OUT] port to be enabled and disabled. All the instrument's other MIDI messages
will continue to be transmitted, even with the MIDI control off.
12. Additional displays.
- [CRESCENDO]: shows the step currently reached by the [CRESCENDO] pedal (point 21)
- [M. BANK]: displays the memory bank of the combinations (general and customised) selected using
the [MEM. BANK +] and [MEM. BANK -] pistons (point 15).
13. General pistons.
These pistons recall the general combinations of the memory bank selected using [MEM. BANK +] and
[MEM. BANK -] (point 15). These combinations can be modified; the procedure for saving them is
described in point 14.
Viscount
39
UNICO
/ 8
-
7
/