5.3 Operation
•
After unpacking the device but before connecting it to the power source, wash it.
GN containers should be washed prior to use. (see 6.2 "Cleaning").
•
Open the sliding door and place the appropriate 1/2 GN containers in the cooling
cabinet.
•
Connect the device to a single grounded outlet.
•
Turn the device on by using the ON/OFF switch. A red control light will come on by
the ON/OFF switch.
•
The digital display will show the set temperature value and the LED cooling indicator
will come on.
•
The device should reach the desired temperature before food products in GN
containers are placed inside.
Digital temperature regulator
⑪
⑫
⑰
⑪
Temperature increase button
⑫
LED cooling indicator
⑬
LED defrost indicator
⑭
LED lighting button
⑮
Settings adjust/save button
⑯
Digital display
⑰
Temperature reduce button
⑬
⑯
⑭
⑮
- 27 -