Note
The RESET button is
purposely hard to
press so that
adjustments are not
canceled by mistake.
Adjusting the brightness
1
Press FUNCTION until "BRIGHTNESS" appears.
BRIGHTNESS
2
Press + or – so that brightness becomes appropriate.
• To make brighter, press +.
• To make darker, press –.
If you do not press any button, the display will go
off after 5 seconds.
Resetting the adjustment to the
factory preset level
Press RESET with a pointed object such as a pen.
The adjustment is reset to the factory preset level.
ON/STANDBY
LAMP
POWER
LASER LINK
FUNCTION
VOL
RESET
RESET
RESET
Adjusting the picture
19
-EN