Sony CPJ-A300 Mode D'emploi page 18

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Adjusting the picture (continued)
Note
"HUE" does not appear
when the PAL color
system video signal is
input.
18
Adjusting the picture
-EN
2
Press + or – so that the picture contrast becomes
appropriate.
• For more contrast, press +.
• For less contrast, press –.
If you do not press any button, the display will go
off after 5 seconds.
Adjusting the hue (NTSC color
system only)
1
Press FUNCTION until "HUE" appears.
HUE
2
Press + or – so that the hue becomes appropriate.
• If the picture is too reddish, press +.
• If the picture is too greenish, press – .
If you do not press any button, the display will go
off after 5 seconds.
Adjusting the color intensity
1
Press FUNCTION until "COLOR" appears.
COLOR
2
Press + or – so that color intensity becomes
appropriate.
• For more color intensity, press +.
• For less color intensity, press –.
If you do not press any button, the display will go
off after 5 seconds.

Publicité

Chapitres

Table des Matières
loading

Table des Matières