Daily Use - Zanussi ZGG75524 Notice D'utilisation

Control knob
Symbol
no gas supply / off position

Daily use

WARNING!
Refer to Safety chapters.
Burner overview
A. Burner cap
B. Burner crown
C. Ignition candle
D. Thermocouple
20
Description
A
B
C
D
A
B
C
D
Symbol
ignition position / maximum
gas supply
minimum gas supply
Ignition of the burner
Always light the burner before you
put on the cookware.
WARNING!
Be very careful when you use open
fire in the kitchen environment. The
manufacturer declines any
responsibility in case of the flame
misuse.
1. Push the control knob down and turn it
counterclockwise to the maximum gas
supply position (
2. Keep the control knob pushed for equal or
less than 10 seconds. This lets the
thermocouple warm up. If not, the gas
supply is interrupted.
3. Adjust the flame after it is regular.
If after some tries the burner does
not light, check if the crown and its
cap are in correct positions.
WARNING!
Do not keep the control knob
pushed for more than 15 seconds. If
the burner does not light after 15
seconds, release the control knob,
turn it into off position and try to light
the burner again after minimum 1
minute.
Description
).
www.zanussi.com