HSM shredstar X5 Notice D'utilisation page 8

Check the machine and cable regu-
larly for damage. Switch the shred-
der off if it is damaged or not work-
ing correctly or before relocating or
cleaning it and disconnect it from
the mains.
– Keep the machine, the plug and cable away
from open fi re and hot surfaces. The ventila-
tion slots must not be blocked or covered
and there must be at least 5 cm space be-
tween the shredder and any wall or furniture.
Service work may only be carried
out by HSM Customer Service or by
the service technicians of our con-
tractual partners.
See page 72 for our customer ser-
vice addresses.
Notice Danger from improper use
Only operate this machine in accordance with
the instructions outlined in "Proper use".
8
3 Machine components
1 2 3 4 5 6
1 Shredded paper container
2 Cutting head
3 Sliding switch for operating mode
4 Safety notice
5 Feed opening for paper
6 Feed opening for CDs and cards
7 LED indicator
4 Setting up
• Insert the CD container provided
• Carefully place the cutting head
• Connect the power plug of the
Note: The document shredder can only be
switched on if it has been placed correctly on
the shredded material container belonging to it.
shredstar X5
english
7
into the bracket on the inside of
the shredded material container.
on the container for shredded
material.
machine into a properly installed
socket.
10/2013