TOE PART OPERATING
SUMMIT bindings have a locker on each toe part.
This locker can take only two positions: the WALK position and the SKI
position.
When you step-in your binding, the locker is automatically placed in the SKI
position.
SKI MODE (downhill) :
To switch the locker into ski mode, push the black locker forward until it
reaches an almost horizontal position. The word « SKI » is now visible on the
lever.
The SKI mode means the clamp system of the toe piece is in release position
and the black locker in low position.. Hence, in such a position, the binding
retains a release capacity. This SKI mode position must be kept during all
descents. Moreover, in such a situation, the boot must be latched into the
heelpiece.
11 |
P a g e
User Manual