Washer Installation (Ptz) - Videotec WASEX2T4AT Manuel D'instructions

Connect the delivery pipe (01), passing it through the
seal ring (02).
Fig. 23
Insert the guard and tighten the safety screw.
Fig. 24
MNVCWASEX_2013_EN
01
02

6.4 Washer installation (PTZ)

Fasten the support (01) onto the PTZ body with the
metal clip (02) provided.
02
01
Fig. 25 Version with single cable entry
01
02
Fig. 26 Version with double cable entry
Shorten the semi-rigid washer pipe (01) as needed.
Unscrew the nut (02) from the joint and slide it along
the pipe. Insert the end of the pipe into the ogive
(03).
01
Fig. 27
Lock the nut to the coupling.
Fig. 28
03
02
15