Videotec WASEX2T4AT Manuel D'instructions page 18

Attach the pipe to the washer support using the
bracket (01), the screws (02) and the washers (03)
supplied. Connect the supply pipe (04).
01
03
02
Fig. 29 Version with single cable entry
02
03
01
04
Fig. 30 Version with double cable entry
16
04
To calibrate the jet, orientate the nozzle towards the
window of the housing.
Fig. 31 Version with single cable entry
Fig. 32 Version with double cable entry
To start the wash system refer to the PTZ manual.
MNVCWASEX_2013_EN