Getting Started; Mounting The Cradle; Attaching The Antenna; Attaching The Rechargeable Battery Pack - PRESIDENT PM-1000 WP Manuel D'utilisation

Masquer les pouces Voir aussi pour PM-1000 WP:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Getting Started

Mounting the Cradle to either a counter or wall.
To counter:
1. Attach the Cradle using the mounting
screws and washers as follows.
To wall:
1. Apply the Cradle to the wall and insert the
two mounting screws into the larger holes
of the Cradle.
2. Push down the Cradle until it is firmly
seated.
3. When you remove the Cradle from the
wall, loosen the screws and push the Cra-
dle up.

Attaching the Antenna

Apply the antenna to the radio as shown.
Be sure the antenna is firmly seated.

Attaching the Rechargeable Battery Pack

1. Snap the battery release clip out and
remove the alkaline battery case. Then
place the rechargeable battery pack
onto the back of the radio. It will only fit
in one way.
2. Snap the battery release clip until it
clicks. Be sure the battery pack fits tightly
against the body.
45

Publicité

Table des Matières

Dépannage

loading

Table des Matières