Using The Alkaline Battery Case; Attaching The Beltclip - PRESIDENT PM-1000 WP Manuel D'utilisation

Using the Alkaline Battery Case

When needed, you can use the battery case with Alkaline AA
batteries (not included) instead of the re-
chargeable battery pack.
To install the batteries:
1. Remove the battery case cover by pulling
the 2 halves apart applying your fingers to
the projections.
2. Install 6 AA Alkaline batteries (not included)
into the battery case.
Be certain to follow the + and - symbols in the
compartment.
3. Replace the battery case cover as follows
until it clicks into place.

Attaching the Beltclip

1. Hold the beltclip in the direction as
illustrated.
2. Apply it to the hanger piece on the
back of the radio. Then slide it up.
3. When you hear a click, the beltclip
is firmly attached.
4. To take the beltclip off the radio, turn
it upside down and slide it up.
46