RGBW LED LIGHT EFFECT 4 x 3W WITH 4 GOBOS
1. Safety Instructions
•
Please keep this User Manual for future reference. If you sell the unit to another user, be sure that he also receives
this instruction booklet.
•
Unpack and check the unit carefully that it has not been damaged during transport before using the unit.
•
Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit.
•
The unit is for indoor use only in a dry location.
•
The unit must be installed in a location with adequate ventilation, at least 0.5m from adjacent surfaces. Be sure that
no ventilation slots are blocked.
Disconnect mains power before fuse replacement or servicing.
•
Replace fuse only with the same type.
•
Make sure there are no inflammable materials close to the unit during operation.
•
Use safety cable when fixing this unit.
•
In the event of serious operating problem, stop using the unit immediately.
•
Never try to repair the unit by yourself. Repair carried out by unskilled people can lead to damage or malfunction.
•
Please contact the nearest authorized technical assistance center and always use the same type of spare parts.
•
Do not touch any wires during operation as high voltage might be causing electric shock.
•
The product is for decorative purposes only and not suitable as a household room illumination.
DISCONNECT DEVICE
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
2. Specifications
Power supply ................... 12Vdc 2A via supplied 100-240Vac 50/60Hz mains adaptor
Consumption......................................................................................................... 12W
LED light source ...................................................................................... 4 x 3W RGBW
Dimensions ....................................................................................130 x 130 x 220mm
Weight .................................................................................................................. 0.8kg
3. Installation
Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the
structure to which you are attaching the unit is secure and able to support a weight of 10 times of the unit's weight.
The equipment must be fixed by professionals at a place where is out of the reach of people and where nobody can pass
by or under it.
©Copyright LOTRONIC 2017
GB
GOBO-RGBW12
2