MC Crypt DJ-20 Notice D'emploi page 32

Connection and Control Elements
(22) Connection CHANNEL 2
Connect this socket to the output of a signal source (e.g. CD player).
(23) Connection CHANNEL 1
Connect this socket to the output of a signal source (e.g. tape deck).
(24) MIC1 and MIC2 connections
Dynamic microphones or condenser microphones with their own power supply and 6.3 mm jacks can be connected
to this socket.
(25) GND Terminal Clamp
To prevent humming distortion, a ground connection can be established via this screw clamp between the mixer and
the ground line of the record player (usually black cable with clamp-type socket).
(26) Connection HP
At this 6.3 mm jack bushing, a commercially available headphone with a 6.3mm jack bush can be connected.
32