Connection and Control Elements
(12) USB interface
Insert the USB storage medium here.
The USB storage medium must be formatted in �AT32.
Storage media with a capacity of max. 4GB are supported.
The USB interface provides a maximum supply current of 500mA. Therefore, storage media with
higher power intake (e.g. some external hard disks) cannot be operated via this interface.
Storage medium recognition after insertion may take a while because the contents must be read
first.
If the storage medium is not recognised, remove it and insert it again.
Only USB storage media can be operated at the USB socket. MP3 players with a USB port usually
switch into PC mode when this port is connected. In this mode, music files cannot be played.
However, you may connect the audio output of your MP3 player to a line-input with a suitable
adapter cable.
Due to the many different storage media on the market, it is possible that some models will not
work with the mixing desk. In this case, try using another storage medium.
(13) Button
Press this button to jump to the next track during MP3 playback.
(14) Button
Press this button to stop MP3 playback.
(15) Button
Press this button to start MP3 playback.
Press the button again to briefly pause MP3 playback.
30