Hendi 150603 Mode D'emploi page 6

Assembly
• Remove the protective film packaging.
• Contact the supplier if there is any damages or
incompleteness and do not use the appliance.
• Connect the non-slip feet E to the legs C.
• Connect the assembled legs to the body A using
the provided star bolts F.
General instructions
• Use the appliance outdoors with well ventilation
with at least 3 m from the buildings and struc-
ture.
• Keep the appliance away from (easily) flammable
material.
• Do not move the appliance during use.
• Install the appliance as level as possible.
WARNING: The surface of the external part can become very hot. Keep children away from the barbeque.
Cleaning and care
Attention! Allow the appliance cool down com-
pletely before cleaning or storage.
• Wipe surfaces with a mild detergent or baking
soda mixed with water with a damped cloth.
EN
Storage
• Clean all surfaces.
• Store in a cool dry place to prevent oxidation.
Technical specification
Item
No. of grid
Dimension
Remark: Technical specification is subjected to change without prior notification.
Warranty
Any defect affecting the functionality of the ap-
pliance which becomes apparent within one year
after purchase will be repaired by free repair or re-
placement provided the appliance has been used
and maintained in accordance with the instructions
and has not been abused or misused in any way.
Your statutory rights are not affected. If the appli-
ance is claimed under warranty, state where and
6
• After securing the legs place the grids (B & D) on
the barbecue body A.
• Check to make sure the appliance is assembled
securely.
Note: Tools for assembled are not included.
• No need to grease the appliance, products will let
go themselves, for fish products we do advise you
to grease the appliance.
• After use, allow charcoal to completely extinguish
itself. Dispose of the ashes in a proper location.
• For stubborn stains, use a citrus-based degreas-
er and a nylon scrubbing brush.
• Rinse clean with water.
• Allow it to dry well.
Note! If oxidation does occur, remove oxida- tion
using a (wire) brush (Not supplied).
150603
2
770x380x(H)760mm
when it was purchased and include proof of pur-
chase (e.g. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
150801
3
1145x380x(H)770mm