Filling The Cleaning Beaker; Choose Cleaning Time And Rpm - DENTAURUM activeblue Mode D'emploi

Please observe the processing order:
1. Clean using 200 ml activefluid cleaning liquid in the cleaning device for approx. 20 min.
2. Remove any residual stains by simple mechanical cleaning with a toothbrush under warm
running water.
3. IRinse and disinfect the cleaned object thoroughly before transferring to the patient.
The submerged object may cause bacterial contamination of the activefluid cleaning
liquid. For this reason: Always use fresh activefluid cleaning liquid for every new
cleaning sequence!
Information on disposal:
The used activefluid cleaning liquid can be disposed of in the waste water system. Please observe
local and national regulations. Request information from your local authorities about proper disposal.
Delivery and storage:
With the unit: 400 ml container (sample).
Reordering: 1000 ml container (REF 150-020-00)

5.3. Filling the cleaning beaker

For use in the activeblue high-performance cleaning device.
- 75 g cleaning needles (corresponding to one packaging unit),
- 200 ml activefluid cleaning liquid, equivalent to filling the beaker to the MIN mark.
- the object to be cleaned. Make sure the liquid level stays clear of the MAX mark.
Do not overfill the beaker.
Never use the appliance with the cleaning beaker open (Fig. 5).

5.4. Choose cleaning time and RPM

i
The cleaning time in the appliance will depend on the nature of the selected RPM and
the degree of soil and staining. It is advisable to check the results several times during
cleaning if you have no previous experience with this appliance.
Never open the beaker while still inside the appliance (Fig. 5).
Recommended RPM:
1200 min : Cleaning objects with delicate areas and function elements.
-1
1600 min : Standard setting for orthodontic appliances.
-1
2000 min : Cleaning objects with heavy contamination and stubborn plaque.
-1
EN
activeblue en 25