Hansgrohe Axor Starck 10406 1 Série Instructions De Montage / Mode D'emploi / Garantie page 8

3⅜" 2½"
⅜ "
8
3⅜" 2½"
8 mm
English
Installation with Duravit Starck
X Tub
There must be a minimum 1⅛" air
gap between the tub filler and the
top of the tub. If the air gap is not at
least 1⅛", order extension 97686000
separately.
Cut the plaster shield on the rough-in ⅜" above the
finished floor.
Remove the flush insert screws using an 8 mm Allen
wrench.
Do not discard the screws!
Remove the flush insert.