Hansgrohe Axor Starck 10406 1 Série Instructions De Montage / Mode D'emploi / Garantie page 2

8½"
3⅝"
1⅝"
4⅞"
½" NPT
6"
This unit is listed by IAPMO for use in the
US and Canada.
A112.18.1
2
6¾"
7½"
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate - spout
Flow rate - handshower
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• Protection against backflow is provided by check
valve and an automatically resetting diverter.
• This trim is for use with rough 10452181 (not
included). The rough must be installed and the
finished floor surface completed and made
watertight.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
Tools Required / Outiles Utiles /
Herramientas Útiles
8 mm
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
5.8 GPM@ 44 PSI
max. 2.5 GPM