Hansgrohe Axor Starck 10406 1 Série Instructions De Montage / Mode D'emploi / Garantie page 12
Masquer les pouces
Voir aussi pour Axor Starck 10406 1 Série:
Publicité
English
Position the tub filler on the rough.
Make sure that the unit is level. Tighten the 6 screws.
Lower the flange and escutcheon to the floor.
8 mm
Install the valve assembly. Tighten the nuts.
Install a black rubber hose washer in the short hose
end connection.
Connect this end to the handshower port on the bot-
tom of the housing.
Install the screen washer in the long hose end con-
nection. Screw this end to the handshower.
Place the handshower in the holder.
Seal the floor around the tub.
12
Publicité
