Storage - Steinbach Poolrunner Battery Basic Notice Originale

1. Open all clips
2. Take the top part
3. Remove the filter unit
4. Thoroughly rinse the filter unit with plain
tap water.
5. Rinse the device after each use with plain
tap water inside and out.
The device is clean.

Storage

1. Thoroughly clean the device (see section "Cleaning").
2. Let all parts dry completely.
3. Fully charge the device.
Recharging is required after at latest 3 months due to self-discharge.
4. Then store the device and its accessories in a dry and frost-free place (≥ +5 °C)
without direct sunlight.
.
12
off.
1
.
2
13
1
12
14
2
15
41