Reiner speed-i-Jet 798 Mode D'emploi Succint page 16

speed-i-Jet 798
3.5 Printing
Remove the USB cable from the speed-i-Jet 798.
f
Remove the protective cap
f
Take the speed-i-Jet 798 into your hand like a pen.
f
Hold down the release key
f
over the printing area.
They typeface depends on the speed at which the speed-i-Jet 798 is moved over the
printing area. More information and setting options are provided in help.
4. Technical data and accessories
4.1 Nameplate
Observe the nameplate prior to connecting the device.
The nameplate is located on the inner side of the print-head flap
Note:
• Nr. = Serial number
• = speed-i-Jet 798 meets all the requirements of EC Directive 2004/108/EC.
The device carries the CE mark for this reason.
4.2 Transport and disposal
Transport
Store the speed-i-Jet 798 packaging carefully, as it is used for protection during transport.
Disposal
Directive 2002/96/EC (WEEE)
Electrical and electronic devices and accumulators do not belong in
household or residual waste.
Please dispose of your old devices in an environmentally friendly manner.
15
2
.
1
and move the device with the print-head nozzle
4
3
.