Specifications - Martin Logan Motion SLM Mode D'emploi

s
peCiFiCations
Frequency.Response . . . . . . . . . . . . . . . . . . . . .
Dispersion. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Crossover.Frequency . . . . . . . . . . . . . . . . . . . . .
High.Frequency.Driver. . . . . . . . . . . . . . . . . . . .
Low.Frequency.Drivers. . . . . . . . . . . . . . . . . . . .
Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Components . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recommended.Amplifier.Power . . . . . . . . . . . . .
Binding.Post.Inputs . . . . . . . . . . . . . . . . . . . . . .
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions.with.wall.bracket.(HxWxD) . . . . . . .
*Specifications are subject to change without notice.
8
*
MARTINLOGAN.MOTION.SLM
110–22,000 Hz ± 3 dB
80° x 80°
94 dB @ 2.83 volts/ meter
4 Ohms. Compatible with 4, 6 or 8 Ohm rated
amplifiers.
2,600 Hz
1" x 1.4" (2.6cm x 3.6cm) Folded Motion
Transducer with 5.25" x 1.75" (13.3cm x 4.4cm)
diaphragm.
Two 4" (10.2cm) paper cone. Two 4" (10.2cm)
paper cone passive radiators.
Sealed
Custom air core coil inductors. Polyester film
capacitors in series and low DF electrolytic
capacitors in parallel. Overall system thermal/cur-
rent protection.
20–140 watts
Push style
6.5 lbs. (3 kg)
25.3" x 6.4" x 1.83" (64.2cm x 16.2cm x 4.75cm)