Belkin OmniView SMB CAT5 F1DP104Aea Manuel De L'utilisateur page 17

Installation
Optional Bracket Installation (F1DP104Aea)
The SMB 4-Port CAT5 KVM Switch can be installed into a 19-inch server rack
using an optional OmniView Rack-Mount Kit (F1D005).
Step 1
Attach the Rack-Mount Bracket to your SMB CAT5 KVM Switch using the
Phillips screws provided. (Refer to diagram below.)
Step 2
Mount the SMB CAT5 KVM Switch to the rack-rail assembly. (Refer to
diagram below.)
NOTE: If this SMB CAT5 KVM Switch will be daisy-chained to another KVM
switch, set the BANK address prior to installing on a rack. Refer to the section
titled "Connecting Multiple SMB CAT5 KVM Switches (Daisy-Chaining)" in this
User Manual.
Your SMB CAT5 KVM Switch is now mounted securely to the rack and
you are ready to connect the console.
14