Initial Settings - Krups EA9000 Série Mode D'emploi

When your machine displays this screen to you, or when you have performed the water hardness
test, you must indicate the number of red and green zones, using the touch screen. If the stick
shows 2 red zones and 2 green zones, press the first two red squares and the last two green
squares on the touch screen. The screen will then show an identical representation of your stick.
If you move home or if the quality of your water changes significantly, you can also reset the water
hardness at any time.

3.2 Initial settings

When using the machine for the first time, you will be prompted to configure various settings.
Follow the indications displayed on the screen. The aim of the following paragraphs is to give you
a few visual cues.
3.3 Configuring the settings
Switch on the appliance by pressing the ON/OFF button (1). A welcome message is displayed on
the screen, followed by the "Language" setting menu. After each selection, you can go back by
using the symbol. Configure the other settings by following the indications on the screen.
The appliance will also require you to set the following parameters:
LANGUAGE
Your machine has a touch screen.
Select a display language by pressing the arrows until "Hello" appears
in the language of your choice.
Press OK to confirm.
HOTLINE NUMBER FOR COUNTRY OF RESIDENCE
This number is associated with the country you have selected. However,
you can change it and it may be changed at any time.
ENGLISH
17