Krups EA9000 Série Mode D'emploi page 244

KRUPS
SERIE EA9000
Place a recipient with a capacity of at least 0.6 litres under the coffee
nozzles and press OK.
The descaling phase will start.
3
When the descaling is complete: Empty your recipient and put it
back, then empty the water tank, rinse it well and fill it again.
The first rinsing will start.
4
End of the first rinsing: Empty your recipient and replace it.
5
End of the second rinsing and of the steam circuit descaling phase.
The nozzle returns to its cleaning container.
Refit the Claris Aqua Filter System filter, if necessary.
6
Empty your recipient and fill the water tank.
!
Caution: During the descaling or coffee circuit cleaning programmes, water can splash quite strongly.
If required, place a paper towel on the drip tray.
44