Krups EA9000 Série Mode D'emploi page 237

You can access the "Maintenance" menu from the main menu
by pressing the "Maintenance" tab.
To clean the nozzle and its container, you must follow the sequence
shown in the Maintenance tab.
1
Failure to follow this sequence may damage the system.
Press the "Manual cleaning of the nozzle" button on the touch screen.
To quit the "Maintenance" menu, press the "Maintenance" tab.
The nozzle comes out of the cleaning container.
You can clean all of the parts of the machine located behind the coffee
nozzle.
2
Remove the two drip trays.
Empty and clean them.
The nozzle moves forward and slightly downward.
3
Unscrew the nozzle tip (10) with the steam nozzle (9).
Do not remove the tip seals, as this may damage them and affect the
frothing performance.
4
! Caution: Risk of scalding while unscrewing; the temperature of the nozzle can be high (> 50°C).
Clean the three holes on the nozzle tip using the pin supplied for this
purpose with the Welcome Pack. You must fully separate the two
parts to clean them properly.
Do not wash the tip in the dishwasher.
Caution: clean the tip properly.
5
Press the "OK" button.
ENGLISH
37