Krups EA9000 Série Mode D'emploi page 228

KRUPS
SERIE EA9000
Fill the cup with the volume of milk indicated on the screen and
place it under the coffee spouts.
The cup must be placed close to the cleaning container, under the steam
nozzle, at the back of the niche.
However, do not press the cleaning container (11) with the cup; otherwise,
it might break off.
3
You can lower or raise the coffee nozzle to suit the size of your cup. The
steam nozzle will descend just behind the coffee nozzles. Caution: the
maximum height of the cup is defined by the coffee nozzles; do not tilt the
cup to place it under the coffee nozzles.
To use a large cup (or mug), you might have to remove the small drip tray (6).
Press the "OK" button.
Milk preheating phase.
Milk frothing phase:
the milk is then frothed
according to the chosen recipe.
4
The nozzle moves up and draws back to return to its cleaning
container.
Remove the cup when the screen shows: Your milk is ready.
Rinsing the nozzle.
5
The nozzle is rinsed automatically. You must wait for this rinsing to be
complete before starting the next preparation.
Hot water
Press the "Hot water" button on the touch screen.
If the machine detects no water when you request this recipe, it will ask
you to fill the tank.
1
28