Before First Use; Installing; Initial Settings - Krups EA88 Série Mode D'emploi

Danger: The appliance should be plugged into a 110-120V AC outlet with a
connection. Otherwise, you could be exposed to fatal injuries due to ground
electric shock!

Initial settings

When using the appliance for the first time you are asked to perform certain steps. Follow
the instructions that appear on the display. The purpose of the following section is to give
you some visual guidance.
Turn on the appliance by pressing the On/Off (S) button. Let the appliance guide you.
These are the first settings requested:
Language
Select a display language by pressing on the arrows
appears.
Press "OK" to confirm the selection.
Country
Select your country of residence by pressing the arrows until the country appears.
Press "OK" to confirm your selection.
If your country does not appear on the list, press OTHER.
The appliance will also ask you to set up the following settings:
Hotline number for your country of residence
If you do not know the hotline number for the country you entered in the list, you can search
for it on the Internet site indicated on the screen.
Unit of measurement
You can select whether you would like to use oz or ml as your preferred unit of measurement
unit.
Date and time
To set the time, click on the required time format (24H or AM/PM).
Auto on / Auto off
It is possible to set the time at which you would like the appliance to turn on automatically
every day. Select the time at which you would like the appliance to start automatically using
selected time format.
You can also choose the time after which your appliance will automatically switch off (time
without use).
Water hardness
You must set your appliance based on the water hardness, between 0 and 4.
Information on water hardness:
Before using the appliance for the first time, determine the hardness of your water so that
you can adjust the appliance to this hardness. You should also do this when you are using
your appliance in a location where the water hardness is different or you notice a change
in the water hardness. To determine the water hardness, use the strip supplied with the
appliance or contact your water company.
The table below contains information on the different hardness level:
10

BEFORE FIRST USE:

INSTALLING THE APPLIANCE
until the required language