Preserving And Maintaining Your Hood - Brandt TV399XF1 Guide D'utilisation Et D'installation

Preserving and maintaining your hood

Before using the cassette filter for the first time
remember to remove the protective film
ESSENTIAL ONCE A MONTH
MAINTENANCE
This filter retains all the fatty vapours and
dust. It is the most important element for
REASON
keeping your hood efficient.
Wash using a standard household product,
rinse thoroughly and leave to dry.Put the filter
HOW
in your dishwasher vertically for cleaning. (Do
not allow it to come into contact with any
dirty dishes).
Never use steel-wool pads, abrasive products or over-stiff brushes.
To clean the outside of the hood and the light cover, use any standard household product diluted in
water and wipe with a clean soft cloth.
The hood must be disconnected from the mains before removing the filter cassettes and
after cleaning the filter cassettes must be fitted again according to the instructions.
Removing the cassette filter
1
2
After cleaning replace the filter by carrying out
the procedure in reverse.
Cassette filter
To avoid any risks of fire
Removing the charcoal filter
1. Remove the cassette.
2. Put the new charcoal filter on the cassette that goes
at the back of the hood.
3. Slot the two support rods into position.
4. Carry out the same operation on all the
cassette filters.
14
Active charcoal filter
For hoods set up for recycling
YEARLY
This filter retains odours and,
depending on its use, should be
changed at least once a year.
Order these filters from your local
retailer ( using the reference
marked on the identity plate inside
the hood ) and note down the date
you have changed it.