Polygroup SUMMER WAVES ST1100 Manuel Du Propriétaire page 9

Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts.
WARNING:
POSITION THIS PRODUCT AWAY FROM THE POOL, SO AS TO PREVENT CHILDREN FROM CLIMBING ON IT AND ACCESSING THE POOL.
1. Set up the pool by following all instructions comes with the
pool. Do not fill water until the Filter Pump is properly
installed. Locate the Outlet and Inlet openings on the pool wall.
Inlet
3. Insert and push the Locking Pins
secure the Pump with the Sand Tank Base
17
PUSH
SETUP INSTRUCTIONS
Outlet
all the way down to
16
1
16
17
1
OWNER'S MANUAL
2. Snap the Pump on to the Sand Tank Base
17
17
4. With the Drain Valve of the Sand Tank
Place the Sand Tank on the Sand Tank Base
2
1
1
pointing outward.
2
.
1
2
Drain Valve
ALIGN
1
9