Polygroup SUMMER WAVES ST1100 Manuel Du Propriétaire page 12

12. Turn the CAM-HANDLE so that the CAM-BOLT is inserted
into the slot on the other jaw.
CAM-HANDLE
14. Continue to turn the CAM-HANDLE to tighten the jaw until no
more turns can be made. Align the CAM-HANDLE with the
Clamp and push the CAM-HANDLE toward the Sand
7
Tank .
2
12
CAM-BOLT
CAM-HANDLE
13. Hold the CAM-HANDLE with one hand and start turning in
clockwise direction.
15. Insert the CAM-SHAFT Bolt Cap
CAM-HANDLE
to the end of the CAM-BOLT.
8
8