Polygroup SUMMER WAVES ST1100 Manuel Du Propriétaire page 13

16. Connect the Short hose
14
and the 6-Port Valve Inlet. Tighten the Hose Clamp
with a flat blade screwdriver.
6-Port Valve Inlet
15
14
15
Pump Outlet
FUNCTIONS OF THE 6-PORT VALVE
VALVE POSITION
1 BACKWASH
2 RINSE
3 FILTER
WASTE
RECIRCULATE
CLOSED
NULL
between the Pump Outlet
15
OPERATING INSTRUCTION
FUNCTION
To reverse the water flow and wash the sand bed.
Backwash the sand before first use and every 2 weeks.
To cleanup and level out the
sand bed after backwash.
For normal filtration and regular vacuuming.
For vacuuming directly to drain
and lowering of water level.
To recirculate water without filtering.
To shut off all flow between the pool and sand filter.
DO NOT TURN ON THE PUMP.
For winterizing and storage.
OWNER'S MANUAL
17. The sand filter pump is now fully assembled. Connect the sand filter
pump to the pool with the Long Hoses
Connect the pool Outlet to the Pump Inlet. And tighten the Hose
Clamp with a flat blade screwdriver. Connect the 6-Valve Port
15
Outlet to the pool Inlet Port. Tighten the Hose Clamp
blade screwdriver.
6-Port Valve Outlet
15
13
15
Pump intlet
Pool > Pump > Sand (backward) > Drain Outlet
Pool > Pump > Sand (forward) > Drain Outlet
Pool > Pump > Sand (forward) > Pool
supplied with the pump.
13
with a flat
15
Inlet Port
15
Outlet Port
13
15
WATER FLOW DIRECTION
Pool > Pump > Drain Outlet
Pool > Pump > Pool
No Flow.
DO NOT TURN ON THE PUMP.
No flow.
13