Polygroup SUMMER WAVES ST1100 Manuel Du Propriétaire page 7

Preliminary Steps:
1. READ ALL INSTRUCTIONS CAREFULLY and get a thorough understanding of what is required to assemble your ST series Filter Pump.
2. Before you begin to assemble the pool, identify, count, and check all parts needed for assembly.
3. It is recommended that you have some PETROLEUM JELLY on hand for lubricating the gaskets.
4. Installer shall follow written instructions provided for operation of the filter pump systems.
5. All electrical components shall be installed in accordance with Article 680 of the National Electrical Code (NEC) "Swimming Pools, Fountains and Similar
Installations" or its latest approved edition.
6. The Pump are manufactured by Polygroup
SAND PUMP POWER INFORMATION
SAND PUMP MODEL
10" SAND FILTER (WITH CP2000 PUMP)
12" SAND FILTER (WITH CP2000 PUMP)
ITEMS
1
Sand Tank Base
Sand Tank
2
Drain Valve Cap
3
6-Port Valve Drain Outlet Window
4
5
Center Pipe
6
7
CAM-SHAFT Bolt Cap
8
6-Port Valve O-Ring
9
Sand Specifications:
Fill the tank with #20 silica sand. You can purchase the sand from your local home improvement or building material store.
SAVE THESE INSTRUCTIONS
and ETL control number 4000608 and 4006317 - double insulated and grounded - 220-240 V.A.C - 50Hz.
®
PARTS LIST
PARTS NAME
A) ST1100
B) ST1600
A) ST1100
B) ST1600
A) ST1100
B) ST1600
Sand Guard
Clamp
WATTAGE
200 watts
200 watts
QTY. ITEMS
10
1
11
12
1
13
1
Short Hose
14
1
15
1
16
1
17
1
18
1
19
1
OWNER'S MANUAL
AMPERAGE
1.0 amps
1.0 amps
PARTS NAME
6-Port Valve
6-Port Valve Drain Outlet Cap
Pressure Gauge
Long Hose
ST1100 14" Hose
ST1600 12" Hose
Hose Clamp
Locking Pin
Pump
1.5" Fitting O-Ring
6-Port Valve Handle
QTY.
1
1
1
2
1
6
2
1
5
1
7