General; Building-In Dimensions - Pelgrim MSL600 Mode D'emploi

23
installation

General

This appliance should be connected to the power supply by a recognized fitter
who is familiar with, and works according to the correct safety regulations.
Important that you know:
If the cooker hood is to be fitted to an existing duct no other appliances,
such as a geyser or heater, may be connected to that same duct.
Consider local regulations with respect to the ventilation of gas appliances!
The cooker hood should be mounted at least 650 mm above the hob.
The shorter the duct, and the fewer the bends in it, the better the cooker
hood will work.
Before you start drilling check that there are no installation cables present.

Building-in dimensions

MSL600/SLK600
598
510
150
40
265
200
SLK680
598
510
¿ 150
230
34
280
SLK650
552,4
389
280
174
SLK980
898
810
ø 150
230
34
280
180
598