Symbols; Description - Stiga BC 48 Li Manuel D'utilisation

separate waste collection
of the products and
packaging used allows the
materials to be recycled
and reused. Reuse of recycled
materials help to prevent
environmental pollution and
reduces the demand for raw
materials.

3. SYMBOLS

Some of the following symbols may be used on
this tool. Please study them and understand their
meaning. Proper interpretation of these symbols
will allow you to operate the tool better and safer.
Class II
Double insulation
Warning! DANGER! Failure
to use this machine correctly
can be hazardous for
oneself and others. Read
the instruction manual
before using the machine
Anyone operating the
machine under normal
conditions for continuous
daily use may be exposed
to a noise level equal to or
exceeding 85 dB (A). Wear
ear protectors, safety goggles
and a protective helmet.
Wear gloves and
safety boots!
Projection hazard! Be careful
of flying debris projected by
the cutting means, that can
cause serious injuries to
persons or damage to things.
Projection hazard! Keep
any people or pets at
least 15m away when
using the machine!
<5500
SERVICE
Servicing requires extreme care and knowledge
and should be performed only by a qualified
service technician. For service we suggest you
return the product to your nearest AUTHORISED
SERVICE CENTRE for repair. When servicing,
use only identical replacement parts.
The operation of any power tool can
result in foreign objects being thrown
into your eyes, which can result in severe
eye damage. Before beginning power tool
operation, always wear safety goggles,
safety glasses with side shields, or a full
face shield when needed. We recommend
Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with
side shields. Always use eye protection
which is marked to comply with EN 166.

4. DESCRIPTION

A. Battery pack
B. Battery charger
C. Rear handle
D. Lock-off button
E. Fast/slow button
F. On/off power button
G. Switch trigger
H. Harness
I. Front handle
J. Couple
K. Cutting means guard
6
Beware of blade thrust.
Keep away from bystanders.
Maximum cutting
means speed.
Do not use circular saw
blades. Danger: Using
circular saw blades
on models that are
not designed for them
exposes the user to the
danger of very serious
or even fatal injuries.
Do not leave the
machine in the rain (or
in damp conditions).